Homemade plow for plowing

A self-made plow is a universal invention that is suitable for both plowing and planting potatoes. The plow can be made independently of the available materials. The proposed model of the plow consists of a control unit and a device designed for plowing. The control unit is a stand, which consists of the main control elements and accessories. Namely: 1 - rectifying bridge (power supply unit). 2 - electric motor. 3 - gearbox combined with gear. 4 - cable - 5 mm, acting as a winch.5 - anchor (working part from a shovel).
 Home-made plow for plowing the land
A plow that is designed for plowing the land consists of the following elements: 1 - steering wheel (plow control lever). 2 - plowshare. 3 - base with fasteners.
 base with fasteners
Installation and connection of the plow. 1.Anchor must be set at an angle for a better stop.
 at an angle for a better emphasis
2. After that, the anchor should be deepened into the ground to the connecting plate.
 go deep into the ground
3. Then the anchor is attached to the control device using a piece of armature.
 is attached to the control device
4. Before the barrier bar near the cable also drive in rebar. In addition, she will keep the control unit in place during operation.
 Home-made plow for plowing the land
5. In the working position, the gearbox is in the engaged position.
 Homemade plow for plowing the land
6. The control unit is ready for operation.
 Home-made plow for plowing the land
7.After installing and securing the control device, a plow should be attached to it. To do this, the free end of the cable is attached to the base of the plow.
 Home-made plow for plowing the land
Principle of operation and operation. 1 . Plow carried to the desired distance. 2. The ploughshare is driven into the ground to the required depth.
 Homemade plow for plowing the land
3. The left leg is set on the plowshare, and the right leg rests on the ground.
 Home-made plow for plowing the land
4. Thus, while the plow is moving along the ground, the plowman pushes with his right foot and controls the plow with his weight.
 Homemade plow for plowing the land
5. During operation, the wheel of the plow must not exceed the level of the tiller's belt.
 Home-made plow for plowing the land
6.When the plow reaches the end of plowing, the control unit is switched off and the plow is again placed on the opposite side of the plot. A plow made according to this principle is capable of plowing the land, which has been left for a long time without leaving.
 plot
The plowed land has smooth and deep furrows. plowed plot
After plowing the land should be treated with a harrow. This is done to break ground blocks. To do this, instead of a plow, a harrow is attached to the control unit.
 fixing the harrow
Clutching the ground in the same way as plowing.
harrow
In the end result, a practically flat land suitable for use is obtained.  Homemade plow for plowing the land

Related News


Cork Wobbler
Hypotrophy. Mixed hypotrophy - symptoms and treatment
How to decorate a Christmas tree on the street
Tatar pies - a dish that is worth trying
Songs for May 9: modern lyrics for children and youth