How to fix the panels on the wall

You will need
  • - building level;
  • - self-tapping screws;
  • - drill;
  • - a plane;
  • - tape measure;
  • - saw;
  • - staple gun with brackets;
  • - a hammer;
  • - wooden slats.
Calculate the amount of material and components Measure the length of the wall using a tape measure and divide the resulting figure by the width of the panels. When measuring, it is also necessary to take into account the dimensions of door and window openings. Their value must be subtracted from the length of the wall obtained earlier. Separately, calculate the size of the surfaces under the windows, as well as above the door and windows. The length of the panels should be chosen based on the height of the ceilings in the room. The number of components must be calculated on the basis of the features of the finishing of door and window openings, as well as the number of external and internal corners in the room.
Preparepanels�and tools. It should be remembered that when unpacking packs with wall panels is not recommended to pull outpanels�from the end of the pack, becauseThis may cause scratches on their face. Prepare the required number of rails for crates. It is recommended to use galvanized metal parts for mounting plastic panels.
Assemble the crateGrind the walls and attach wooden slats to them with dowels and screws. All slats must be set to level. The distance between the slats should be 50-60 cm. It should be noted that the batten slats should be placed strictly perpendicular to the panels. When mounting horizontally, the slats should be mounted vertically on the wall, and horizontally for vertical mounting.
Mount wallpanelsInstallation of wall panels should start from the left corner and move to the right corner or window or doorway. Install a special corner in the corner with metal brackets (finishing element). Insert the first panel into the groove of the corner. For this, a mounting shelf is provided.panels. Check the verticality of the mount with a building level. Secure the second mounting shelfpanels�on the crate. Insert spike nextpanels�into the groove already installed.When installing the panels should ensure that they are as close as possible to each other. The last wall panel is inserted into the groove of the finishing element.
Attach floor and ceiling skirting. Attach baseboards can be using the same metal brackets or nails. Installation of wall panels is completed.
Offer from our partner
If you purchased plastic panels in the cold season, then before unpacking and installing them, let them "lie down" in a warm room. It should be taken into account that if the panels were stored at a temperature below 0 degrees, their acclimatization time should be at least 48 hours, if at a temperature from 0 to +10 degrees - at least 12 hours.
Helpful advice
Installation of decorative panels does not require preliminary preparation of the walls - there is no need to remove old paint, leveling and puttying.
If you install wall panels in a room with high humidity, it is necessary to treat the battens of the batten with a special water-repellent compound. Another option is to use metal profiles instead of wooden slats.

Related News

What is a union
7 maxi skirts that go all
Little Snowman
How to make kvass from chicory - 4 step by step recipes with video
Wi-Fi USB Antenna
Custard pancakes on kefir
How to make puff pastry boats
What to wear to the rink girl