How to make sound insulation ceiling

You will need
  • - level;
  • - metal frame and drywall, building hardware to install a suspended ceiling;
  • - pencil and tape measure;
  • - scissors for metal;
  • - acrylic sealant;
  • - fiberglass and mineral fiber.
Cover all joints with acrylic sealant on the ceiling.ceiling�and walls, corners, cracks and crevices that increase sound permeabilityceiling.
Draw a pencil line for the initial profile of the structure at a distance of 15-20 cm fromceiling. Use for this level. Secure the initial profile around the room with dowels in 40-60 cm increments.
Markupceiling�under the main bearing guides at a distance of 125 cm from each other (this size is half a sheet of drywall). Fasten the hangers in 40 cm steps along the marked lines. Install the bearing guides into the frame with metal screws at a short distance from the wall to avoid deformation.ceiling�due to a variety of contingencies.Markupceiling�under the transverse guides in increments of 60 cm. Cut the transverse guides of the desired length with metal scissors and install them.
Fill all cavities between the frame guides with mineral wool or fiberglass. Fix the drywall on the metal frame with metal screws with a step of 20 cm. Leave a gap of 2-3 mm between the sheets of drywall. Seal the joints between the sheets of drywall. Prepare the ceiling for painting.
Offer from our partner
Related videos
Sound insulation of the ceiling should be carried out in close combination with works on sound insulation of the walls and the floor - only then the noise level in the room will significantly decrease.
Helpful advice
If the height of the room is sufficient, install a two-layer insulating structure.

Related News

What to see in Cyprus
The whole truth about the wardrobe of the real Italians
How to do petting
Crafts for giving from plastic bottles - photo, video master class
Brogues - shoes for real mods
How to behave after sex