Making a case for a touch mobile phone

Today, in the salons of cellular communication there is a huge range of covers for cell phones, which satisfy all needs and tastes. However, it is not uncommon for a customer to purchase a case for a specific phone model that the choice is limited to a few standard options. It is very easy to find a silicone case or a handbag for a touchscreen phone, but the original options are not so easy to find. A swing case for a phone. make an armor-piercing case for your cell phone with your own hands. The process will take about three hours of time, with all the necessary nearby. So, for the manufacture of the cover will need: • Mobile. You can do with data on its size, but it is desirable to try on every detail on it in the manufacturing process • Flexible plastic.Suitable plastic folder for papers • Leather. Or another fabric. Better - leather • Metal plate with a thickness of 1 mm. Profiled - good • Tools and other things: scissors, marker, ruler, sewing machine, Moment glue Making a frame. The frame part is what the whole structure will hold on. Let's make it out of plastic.
 mobile phone case
1. We place the phone display down on a sheet of plastic, and mark on it the dimensions of the cellular. You will need a ruler to accurately verify the size and their application to the material. In order not to get confused, you can act in stages: first, “wrap” the phone into a sheet of material, saving the places of its bend, and only then cut out the elements, the position and shape of which corresponds to the cellular controls — the display, buttons. It should look like this:
 mobile phone case
The largest cutout in the center is a display, two" squares "on opposite sides - a window for the camera
2. Trying on the frame, it should work out like this: Fastening on the phone case. The front part. The front part is a folding plate protecting the display of the phone. Can be similar to the rear part - depending on the size of the phone. Everything in order. 1. Take the metal plate as a base. The main thing here is to correctly calculate strength and weight, since heavy iron will simply pull the pocket down during operation. A professional flooring will suit, I used aluminum sheet, which I made stiffeners, bending the edges. Put the phone on the face of the sheet, and mark the dimensions.
mobile phone case

mobile phone case
2. Cut the plate:
 mobile phone case
 mobile phone case
3. Next, put the plate on the skin, and note its size on the fabric. Repeat the process with another piece of leather.One of them will be external, the other - internal.
 mobile phone case
 mobile phone case
in the second figure The mark is made on the outside of the material for ease of sewing. 4. We apply the outer side of the marked piece of leather to another piece with similar dimensions. Sew them on the CMM by markup:  mobile phone case
The height of the" pocket "can be greater than the height of the phone, taking into account the value of another parameter - its width. 5. Cut out unnecessary parts of the material along the seam:
 mobile phone case
6. We turn over the “pocket” =), and “dress” it on a metal plate. The front part is ready!  mobile phone case Making the back part. As already mentioned, the back part can be absolutely identical front (Excluding the size of the cell).To facilitate the design, replaced aluminum with plastic.
 mobile phone case
Cut out plastic from a plastic folder. Its main task is to preserve the shape of the body, not to strengthen it. We bond the resulting parts. 7. Again wrap the frame around the phone, press its overlapping parts, and glue them together. /images/5/239-chehol-mobilnogo-telefona.jpg "alt =" mobile phone case "title =" mobile phone case "> Two sheathed plates and a glued frame part.
8. Cut a hole in the back plate of the camera eye. The edges of the hole can be glued together or pulled together with a thread from the inside so that they do not creep away. 9. We fasten the front flap (sorry for the terms) and the back plate, using “extra” millimeters in length, or by stitching an additional piece of leather. The fixing point will hold the flap.  mobile phone case Bonded parts. 10. Attach the back plate to the frame part with glue. We put the finished cover on the phone.For better fixation, the sealant can be glued to the inside of the case in contact with the phone case - this will complicate the “dressing” process, but will protect it from “sliding down” the case. In order for the lid not to come off, you can use a small magnet or velcro.

Related News


Knitting a New Year's Fun Cock
Ideal options for summer children'
What are linear arrays for?
What to do if your passport is lost
Tangerines in brandy syrup
Cristiano Ronaldo launches his own reality show
How to look expensive at no extra cost